Bull NovaScale R460 E2 Скачать руководство пользователя страница 301 | Manualshive

Страница: 301 / 490

Bull NovaScale R460 E2 Скачать руководство пользователя страница 301

Upgrading Your Server 9-5

4.

Press the POWER switch to power off the server (the POWER LED goes off).

POWER LED

POWER switch

5.

Remove all cables and power cords from the server.

Prepare a Phillips screwdriver to install or remove the component.

The server needs to be pulled out from the rack for installing/removing any internal components other than the hard disk drives
and power supply units.

CAUTION

Observe the following instructions to use the server safely. Failure to follow
these instructions may cause a fire, personal injury, or property damage.
See pages 1-3 to 1-13 for details.

Do not install the server on a rack with leaving covers removed.

Do not pinch your finger with mechanical components.

Note high temperature.

Do not pull out a device from the rack if the rack is unstable.

Do not leave more than one device being pulled out from the rack.

6.

See the section "Preparing for Installation and Removal" described earlier to prepare.

NOTE:

To confirm the device you are going to maintain, use the UID switch and the UID LED

that goes on when the switch is pressed.

7.

Loosen the unlock buttons at the right and left sides of the front panel, and slowly pull out the server from the rack.

The server is locked while you are pulling it. Stop pulling when it is locked.

Press this button to
unlock the server

«
...
299
300
301
302
303
...
»

Содержание NovaScale R460 E2











































































































































































































































































































































































































































































































Отзывы:

Нет отзывов