Bull NovaScale R460 E2, Руководство пользователя, Страница: 450 / 490

E-18 Installing Windows Server 2003 X64 Editions
Switching Hub.
„
When exchange the mother board or option network card, make sure to remove the adapter
team before exchanges and recreate the adapter team after exchange complete.
Setup Teaming
IMPORTANT:
„
AFT/ALB setting must be done after System Update completed.
„
Intel Pro/1000 MF, .MT, GT and PT. do not support SFT.
„
Please confirm the port setting of switching hub (L2) matches the server network adapter
Teaming mode.
1.
Open the [Device Manager].
2.
Open [Network adapters] → [Intel(R) xxx] properties.
3.
Click [Teaming] tab and check the [Team this adapter with other adapters] check box.
Click [New Team].
4.
Fill the name of the team in [Specify a name for the team] and click [Next].
5.
Include the adapter to the team and click [Next].
6.
Select a team type ([Adapter Fault Tolerance]/[Adaptive Load Balancing]).
Click [Next].
7.
Click [Finish].
8.
Click [TEAM: "Team name"] from [Device manager] → [Network adapters] to modify the team. Click [Settings] tab
and click [Modify Team] button.
9.
Refer to the following procedure to set the team member adapter priority status.
–
Set Primary
Point the adapter and click [Set Primary] button.
– Set Secondary
Point the adapter and click [Set Secondary] button.
NOTE:
Adapter priority config can be confirmed by the following procedure:
1. Click [TEAM: "Team name"] from [Device manager] → [Network adapters].
2. Click [Settings] and confirm Adapters in team list.
10.
Click [Test Switch] → [Run test] to confirm the adapter team is properly setup.
Confirm the result in [Test results]
11.
Reboot the system.
Remove Team
1.
Open the [Device Manager].
2.
Click [Network adapters], and open [TEAM: "Team name"] properties.