Bull NovaScale R460 E2, Руководство пользователя, Страница: 439 / 490

Installing Windows Server 2003 x64 Editions E-7
The screen of Step 6 is displayed. Press Enter , and go to Step 10.
<If the SCSI Controller ADAPTEC 29320ALP/ADAPTEC ASC-29320LPE is not connected>
Press
Enter , and go to Step 11.
10.
A list of mass storage devices is displayed.
Select the [Adaptec Ultra320 SCSI Cards (Windows 64-bit)] and press
Enter .
IMPORTANT:
If the following message is displayed when you use the ADAPTEC
29320ALP/ADAPTEC ASC-29320LPE SCSI controller, press S .
The driver you provided seems to be newer
than the Windows default driver.
Windows already has a driver that you can use
for "Adaptec Ultra 320 SCSI Cards
(Windows64-bit)"
Unless the device manufacturer prefers that
you usethe driver on the floppy disk, you
should use the driver in Windows.
The screen of Step 5 is displayed.
Press
Enter , and go to Step 11.
11.
When the following message is shown, press Enter to start "Welcome to Setup".
IMPORTANT:
If you install Windows Server 2003 x64 Editions on the hard disk larger than
2,097,152MB (2TB), you can specify only a value equal to or less than 2,097,152MB as partition
size.
12.
When the installation of Windows Server 2003 x64 Edition has finished, the system reboots automatically.
13.
The [Windows Setup] screen will be displayed after logged on to the system.
IMPORTANT:
„
In this case, the [Windows Setup] screen may not be displayed.
Be sure to install Microsoft Windows Server 2003 R2 x64 Edition DISC 2 according to the
following procedures.
„
You can install Microsoft Windows Server 2003 R2 x64 Edition DISC 2 after the application of
"System update".
Be sure to install Microsoft Windows Server 2003 R2 x64 Edition DISC 2.
In this case, note that the [Windows Setup] screen is not displayed.