Bull NovaScale R460 E2 Скачать руководство пользователя страница 80 | Manualshive

Страница: 80 / 490

Bull NovaScale R460 E2 Скачать руководство пользователя страница 80

3-16 Setting Up Your Server

CONNECTING PERIPHERAL DEVICES

Connect peripheral devices to the server. The server is provided with connectors for wide variety of peripheral devices on its

front and rear. The figure on the next page illustrates available peripheral devices for the server in the standard configuration

and locations of the connectors for the devices.

CAUTION

Observe the following instructions to use the server safely. Failure to follow
these instructions may cause a fire, personal injury, or property damage. See
pages 1-3 to 1-13 for details.

Do not connect any interface cable with the power cord of the

Bull

Server plugged to a power source.

Do not use any unauthorized interface cable.

IMPORTANT:

Power off the server and a peripheral device before connection. Connecting a powered

peripheral device to the powered server will cause malfunctions and failures.

To connect a third-party peripheral device or interface cable to the server, consult with your

service representative for availability of such a device or cable. Some third-party devices may

not be used for the server.

A leased line cannot be connected directly to the serial port connectors.

Secure the power cord(s) and interface cables with a tie wrap.

Form the cables in such a way that they will not come into contact with the door or the guide

rails on the sides of the server.

Form the power cord with a slight slack at the AC inlet of the server. This is to prevent the

power cord from coming off when the server is pulled out from the rack.

Do not apply any pressure to the plug of the power cord.

«
...
78
79
80
81
82
...
»

Содержание NovaScale R460 E2











































































































































































































































































































































































































































































































Отзывы:

Нет отзывов