Bull NovaScale R460 E2 Скачать руководство пользователя страница 271

Страница: 271 / 490

Troubleshooting 8-17

Is BIOS configuration correct?

→

The internal LAN controller may be disabled with the BIOS SETUP utility of the server. Check the setting

with the BIOS SETUP utility.
<Menus to check:
[Advanced] - [PCI Configuration] - [Onboard LAN] - [LAN Controller]>

Have the protocol and service already configured?

→

Install the distinctive network driver for the server. Make sure that the protocol, such as TCP/IP, and services

are properly specified.

Is the transfer speed correct?

→

Open the network property dialog box in control panel to specify the "Link Speed & Duplex" value the same

as the value specified for HUB.

Wake on LAN does not start from standby or paused state.

→

WOL (Wake On Lan) is not available while the system is in standby or paused state.

Event logs in using Intel Network adapter teaming

Event Type:

Warning

Event Source:

IANSMiniport

Event Category: None
Event ID:

Description:

Adapter link down: Intel(R)PRO/1000 ----

Event Type:

Warning

Event Source:

IANSMiniport

Event Category: None
Event ID:

Description:

Intel(R)PRO/1000 ---- has been deactivated from the team.

Event Type:

Warning

Event Source:

IANSMiniport

Event Category: None
Event ID:

Description:

Team #0: The last adapter has lost link.

Team network connection has been lost.

Event Type:

Warning

Event Source:

IANSMiniport

Event Category: None
Event ID:

Description:

Primary Adapter does not sense any Probes:

Intel(R)PRO/1000 ---- Possible reason: partitioned Team.

→

Above-mentioned event log will appear when the system starts.

There is no problem in LAN driver operation.

Содержание NovaScale R460 E2











































































































































































































































































































































































































































































































Результаты поиска

Содержание NovaScale R460 E2

Отзывы:

Bull NovaScale R460 E2, Руководство пользователя, Страница: 271 / 490

Результаты поиска

Содержание NovaScale R460 E2

Отзывы: