Bull NovaScale R460 E2 Скачать руководство пользователя страница 30

Страница: 30 / 490

1-12 Notes on Using Your Server

TRANSFER TO THIRD PARTY

The following must be observed when you transfer (or sell) the server or software provided with the server to a third party:

Server Hardware

Make sure to provide this User's Guide along with the server to a third party.

Provided Software

To transfer or sell any software application that comes with the server to a third party, the following requirements must be

satisfied:

All provided software applications must be transferred and no backup copies must be retained.

Transfer requirements listed in "Software License Agreement" that comes with each software application must be

satisfied.

Software applications that are not approved for transfer must be uninstalled before transferring the server.

Содержание NovaScale R460 E2











































































































































































































































































































































































































































































































Результаты поиска

Содержание NovaScale R460 E2

Отзывы:

Bull NovaScale R460 E2, Руководство пользователя, Страница: 30 / 490

Результаты поиска

Содержание NovaScale R460 E2

Отзывы: