Bull NovaScale R460 E2 Скачать руководство пользователя страница 106 | Manualshive

Страница: 106 / 490

Bull NovaScale R460 E2 Скачать руководство пользователя страница 106

4-22 Configuring Your Server

RAID CONFIGURATION

This section describes how to use the internal hard disk drives as RAID System by Internal RAID Controller.
About the optional RAID Controller, refer to the documents provided with optional RAID Controller.

RAID

Overview of RAID System

What is RAID (Redundant Array of Inexpensive Disks)?

RAID is an abbreviation for "Redundant Array of Inexpensive Disks". The RAID technology allows more than one hard disk

drive (HDD) to be handled collectively.
In actual, RAID can configure more than one HDDs as a single array (disk group) to operate the HDDs effectively. This can

bring higher performance than a single HDD of a large capacity.
The Internal RAID Controller has a feature to divide a single disk group into several logical drives. Operating system

recognizes these virtual disks as if it were a single HDD. Operating system accesses to more than one HDD configuring a disk

group in parallel.
Some RAID levels can recover data from remaining data and parity by using rebuild feature if an error occurs in a single HDD.

This can provide high reliability for the system.

RAID Levels

The record mode enabling the RAID feature includes several levels. Among the levels, the Internal RAID Controller supports

the following levels; RAID 0, RAID 1, RAID 5, and RAID 6. The number of HDDs required to create a disk group varies

depending on the RAID level as shown in the table below.

Number of required HDDs

RAID level

Min. Max.

RAID 0

1

8

RAID 1

2

2

RAID 5

3

8

RAID 6

3

8

IMPORTANT:

To use RAID 5 or RAID 6, you need to additionally install the optional RAID

Upgrade Kit.

NOTE:

For details of the RAID levels, see "RAID Levels" described later in this chapter.

Disk Group

A disk group is configured with more than one HDDs.

The allowable number of disk groups is equal to the number of HDDs.
The figure below shows a sample configuration. The three HDDs are connected to the Internal RAID Controller , creating one

disk group (DG).

«
...
104
105
106
107
108
...
»

Содержание NovaScale R460 E2











































































































































































































































































































































































































































































































Отзывы:

Нет отзывов