Bull NovaScale R460 E2 Скачать руководство пользователя страница 69 | Manualshive

Страница: 69 / 490

Bull NovaScale R460 E2 Скачать руководство пользователя страница 69

Setting Up Your Server 3-5

INSTALLING THE SERVER

This subsection provides the instructions for installing the server into a rack cabinet. (This subsection also describes the

removal procedures.)

WARNING

Observe the following instructions to use the server safely. Failure to follow these instructions may
result in death or serious personal injury. See pages 1-3 to 1-13 for details.

Do not use any rack which does not conform to the relevant standard.

Always use the server in the specified place.

CAUTION

Observe the following instructions to use the server safely. Failure to follow these instructions may
cause a fire, personal injury, or property damage. See pages 1-3 to 1-13 for details.

Do not install/remove the server in/from the rack only by a single person.

Do not install the server on the rack leaving the cover removed.

Do not pinch your finger with mechanical components.

Do not apply any load on the server being pulled out from the rack.

Installation

This server can be installed in either the Bull rack or a third vendor's rack. Take the following steps to install

the server in the rack.

Preparation for installation
When shipped from factory, the left and right slide rails are fixed with tapes at the front and side faces to prevent

from falling off during transportation. Peel off the tape before you install the server in the rack.

Tape

Removing Rail Assemblies

1.

Remove the sliding rails from left and right sides of the server.

«
...
67
68
69
70
71
...
»

Содержание NovaScale R460 E2











































































































































































































































































































































































































































































































Отзывы:

Нет отзывов