Bull NovaScale R460 E2, Руководство пользователя, Страница: 408 / 490

D-4 Installing Windows Server 2008
The partition size required for a system with an installed memory size of 512 MB and a full installation of the operating
system:
6,300MB + (512MB x 1.5) + 512MB + 300MB + application size
= 7,880MB + application size.
If the partition where the operating system is installed is smaller than that required to install the OS and paging file, expand the
partition size or utilize a larger disk. If your system does not have a sufficient dump file size, divide the required file space into
multiple disks by performing the steps below:
1.
Set the partition size to a size sufficient to install the OS and paging file.
2.
See "Setting for Solving Problems" to write the debug information of the dump file onto another disk.
If there is not enough disk space to write the debug information, add another disk for the dump file.
INSTALLING Windows Server 2008
Preparations for Installation
„
ExpressBuilder DVD
„
Microsoft Windows Server 2008 Standard (DVD-ROM) / Microsoft Windows Server 2008 Enterprise (DVD-ROM)
„
User's Guide
„
Getting Started
Windows Server 2008 Clean Installation
This section explains how to perform a clean installation of Windows Server 2008.
1.
Turn on your system.
IMPORTANT:
To install Windows Server 2008, you may need to update BIOS. To check if your
system needs a BIOS update, go to: www.bull.com.
2.
Insert the Windows Server 2008 DVD-ROM into your DVD-ROM drive.
3.
Restart the system.
To restart the system, press Ctrl
+
Alt
+
Del or turn off the system once, and then turn it on again.
IMPORTANT:
When prompted to [press any key to boot from CD or DVD], press Enter while the
message is displayed. If the Windows installation screen (shown in step 4) does not appear, turn off
the system, and then turn it on again.
The DVD-ROM starts. A message "Windows is loading files …" appears.
4.
Select a language and other options from the drop-down lists, and then click [Next].