Bull NovaScale R460 E2, Руководство пользователя, Страница: 209 / 490

Installing the Operating System with Express Setup 5-55
9.
On the [Paging file size for each drive] box, specify as follows:
– A value larger than the recommended size shown in [Total paging
file size for all drives] for [Initial size]
– A value larger than the [Initial size] for [Maximum size]
Then click [Set].
IMPORTANT:
„
The above-mentioned paging file size is recommended for collecting debug information
(memory dump). The paging file with initial size large enough to store the dump file in the
boot drive is required.
Correct debug information might not be able to be collected due to virtual memory shortage
when the paging file is insufficient, so set an enough size of the paging file with the entire
system.
„
For more information on "Recommended" value, see "About the System Partition Size"
described earlier.
„
In case the memory is expanded, re-specify the paging file to suit the new memory size.
10.
Click [OK].
The message to restart the system may appear according to the modified specification.
In such case, follow the message to restart the system.