Bull NovaScale R460 E2, Руководство пользователя, Страница: 129 / 490

Configuring Your Server 4-45
DG is added to Span.
IMPORTANT:
„
To configure RAID0, 1, 5, or 6, perform Span Definition to a single DG only. If you need to
perform Span Definition to several DGs, define VD for the first DG, then select the next DG to
define VD.
„
To configure RAID10 or 50, select several DGs containing the same number of Hard Disk
Drives for Span Definition.
„
Span Definition cannot be performed to DGs containing the different number of Hard Disk
Drives.
Define the virtual drive (VD) in DG that has been created in previous step. When DG was defined, [VD Definition] screen is
displayed. In the "Next LD, Possible RAID Levels" column, available RAID levels and maximum size for VD are displayed.
As an example, define a RAID5 VD of 135.312GB.
1. Specify the necessary parameters in left columns.
2.
Enter "135.132" in "Select Size" field, and select "GB" as a unit.
3.
Click [Accept] at the lower center of the screen.
4.
If you want to define another VD, click [Back] and repeat steps starting from Span Definition screen.