Bull NovaScale R460 E2, Руководство пользователя, Страница: 210 / 490

5-56 Installing the Operating System with Express Setup
Memory Dump (Debug Information) - Windows Server 2003 -
This section describes the procedures for collecting memory dump (debug information) in the server.
IMPORTANT: Cautions for the Memory Dump
„
The staff of maintenance service representative is in charge of collecting memory dump.
Customers need only to specify the memory dump.
„
If any trouble occur after specifying the process below, the message to inform that the system
is in short of virtual memory may appear, but continue to start the system. If you restart the
system in such case, memory dump may not be stored correctly.
Follow the procedure below to specify.
1.
Select [Control Panel] and click [System].
The [System Properties] dialog box appears.
2.
Select [Advanced] tab.
3.
Click [Settings] on the [Startup and Recovery] group box.
IMPORTANT:
Windows Server 2003 x64 Editions
„
To specify "Complete Memory Dump" to write the debug information is recommended.
If the mounted memory size is larger than 2GB, "Complete Memory Dump" cannot be
specified so that specify "Kernel Memory Dump" instead.
„
Specify the drive where there is a free area more than the size of "the memory capacity
mounted on Express 1MB".
„
In case the mounted memory size exceeds 2GB due to the added memory, change the write
debugging information to [Kernel Memory Dump] before adding memory. The size of
debugging information (memory dump) to be taken also changes due to adding memory.
Verify the size of the empty space in the debugging information (memory dump) write
destination drive.
Windows Server 2003
„
To specify "Complete Memory Dump" to write the debug information is recommended.
If the mounted memory size is larger than 2GB, "Complete Memory Dump" cannot be
specified so that specify "Kernel Memory Dump" instead.
„
Specify the drive where there is a free area more than the size of "the memory capacity
mounted on Express 12MB"(In case the memory capacity is more than 2GB, a free
area of "2048+12MB" or more).
„
In case the mounted memory size exceeds 2GB due to the added memory, change the write
debugging information to [Kernel Memory Dump] before adding memory. The size of
debugging information (memory dump) to be taken also changes due to adding memory.
Verify the size of the empty space in the debugging information (memory dump) write
destination drive.