manualshive.com logo in svg

Bull NovaScale R460 E2, Руководство пользователя, Страница: 317 / 490

Поделиться
Скачать
Bull NovaScale R460 E2 Скачать руководство пользователя страница 317

Upgrading Your Server  9-21 

Notes on Replacing Hard Disk Drives in the RAID System 

When the hard disk drives are in the RAID System, you can restore the state before an error using the auto-rebuild feature that 
stores the data in the old hard disk drive into a new one. 

The auto-rebuild feature is available for the RAID 1, RAID5, or RAID6. 

Auto-rebuild is carried out when you hot-swap a failed hard disk drive with a new one (replace the disk while the server is 
powered). While auto-rebuild is in progress, the DISK LED flashes green and amber alternatively to indicate it. 

IMPORTANT:

   

„

 

When auto-rebuild fails, the DISK LED lights in amber. Remove and install the hard disk drive 
again to restart auto-rebuild. 

„

 

If the RAID System management utility is installed, it may display or act as follows. If the 
DISK LED does not light in amber after auto-rebuild, however, auto-rebuild has completed 
successfully. 

 

–  Displays "Rebuild was cancelled" on the screen while auto-rebuild is in progress. 

 

–  Appears to stop and restart auto-rebuild. 

 

Observe the following notes for auto-rebuild. 

„

 

Do not power off the server in the period between a hard disk drive error and completion of auto-rebuild. 

„

 

When you removed a hard disk drive, wait at least 90 seconds before installing the hard disk drive back again. 

„

 

Do not replace another hard disk drive while rebuilding is in progress. (The DISK LED flashes in green and amber 
alternatively while rebuilding the hard disk drive.) 

Содержание NovaScale R460 E2











































































































































































































































































































































































































































































































Отзывы:

Нет отзывов