Bull ESCALA PL860T/R, Процедуры снятия и замены, Страница: 81 / 218

7. Remove the GX adapter card
1. Slide the adapter latch (A) in the direction
shown to release the adapter card.
2. Squeeze the latches (B) to release them
from the adapter card and rotate them in
the direction shown.
3. Gently pull the adapter card straight out
of the system.
8. Install the GX adapter card
1.
Align the adapter card with the expansion
slot and its connector on the system
backplane.
2. With the latches (A) in the open position,
gently push the adapter card straight into
the system.
3. Rotate the latches in the direction shown
until they latch.
4. Slide the adapter latch (B) back into place
in the direction shown to secure the
adapter card.
Chapter 1. Removing and replacing FRUs
73