28.
From the HMC virtual terminal window of a partition in the list of all partitions, type
diag
at the
AIX command prompt.
29.
When the diagnostic operating instructions are displayed, do the following steps:
1.
Press Enter.
2.
Select the
Task Selection
option.
3.
Select the
Log Repair
option.
4.
Select the resource associated with the repair action. If the repair
action was reseating a cable or adapter, select the resource
associated with that repair action. If the resource associated with
your repair action is not displayed on the Resource List, select
sysplanar0
.
5.
Click
Commit
after you have made your selection.
Note:
If the terminal type is not defined, you
are prompted to define it before you can
proceed.
30.
Exit from diagnostics in this partition and return to the AIX prompt.
31.
Have all the partitions in the list of all the partitions you recorded in step 11 on page 188 been
processed?
v
Yes:
Continue with the next step.
v
No:
Go to step 24 on page 189 to process the next partition in the list you recorded in step 11 on page 188.
32.
Have all the serviceable events recorded in step 4 on page 187 been processed?
v
Yes:
Continue with the next step.
v
No:
Go to step 5 on page 187 and process the next service action event in the list of serviceable events recorded in
step 4 on page 187.
33.
While processing all service action events, were you directed to step 14 on page 188?
v
Yes:
Continue with the next step.
v
No:
If the system attention LED is still on, turn off the LED as described in “Activating and deactivating LEDs” on
page 200. Return the system to the customer.
This completes the repair.
Note:
If during the processing of the list of open service action events, some service action events remained open,
further service actions might be required to complete the repair.
34.
Perform the following steps for each entry in the list of A
xx
partitions you began recording in step
14 on page 188, except the partition you were using to debug the original problem.
35.
From the HMC virtual terminal window of a partition in the list of A
xx
partitions, type
diag
at the
AIX command prompt.
190
Power Systems: IBM Power 550 Express (8204-E8A and 9409-M50) removal and replacement procedures
Содержание ESCALA PL860T/R
