Bull ESCALA PL860T/R, Процедуры снятия и замены, Страница: 37 / 218

2. Remove the front cover
Note to expansion unit users: The
instructions in this procedure are written
based on the rack model. Tower users may
still use this procedure. However, expansion
unit users should ignore specific references to
rack-only features such as rack doors, rack
thumbscrews, rack-specific FRU orientation,
and so on.
1.
Open the front rack door.
2.
Remove the two thumbscrews
(A)
that
secure the system unit (B) to the rack.
3. Push the cover release latches (C) in the
direction of the arrows to release the cover
from the system unit.
4. Pull the cover out and away from the
system unit.
3.
Remove the disk drive:
1. Unlock the disk drive handle (A) and pull the disk
drive out toward you as shown.
2.
Support the bottom of the disk drive as you slide it
out of the system unit. Do not hold the disk drive by
the handle.
The concurrent maintenance light for the slot turns off
when you remove the disk drive.
Chapter 1. Removing and replacing FRUs
29