Bull ESCALA PL860T/R, Процедуры снятия и замены, Страница: 63 / 218

22. Install the service access cover
1. Place the service access cover (A) on the
top of the system, about 25 mm (1 in.)
from the front of the system.
2. Hold the service access cover against the
system unit and slide it toward the front
of the system. The tabs of the service
access cover slide beneath the upper
chassis ledge.
3.
Align the two thumbscrews
(B)
located on
the back of the service access cover with
the two holes on the back of the system
chassis.
4. Tighten the thumbscrews to secure the
service access cover.
23. Place into operating position
1. To unlock the rail safety latches (B) , slide
the latches towards the front of the
system.
2.
Push the system unit
(A)
back into the
rack until both system-unit release latches
have locked into position.
Note: Ensure that the cables at the back of
the system do not catch or bind as you
push the system unit back into the rack.
Chapter 1. Removing and replacing FRUs
55