Bull ESCALA PL860T/R, Процедуры снятия и замены, Страница: 159 / 218

10. Install all memory DIMMs in the new processor assembly
1. Ensure that the connector locking tabs (A)
are pushed out in the unlocked position
before installing a memory DIMM.
Attention: Memory DIMMs are keyed to
prevent a DIMM from being installed
improperly. Note the locations of the key
tabs within the DIMM connector before
attempting to install the DIMM.
2.
3.
Carefully grasp the memory DIMM
(B)
along two edges and align the connector.
4. Insert the memory DIMM firmly into the
connector.
5. Secure the memory DIMM by pushing in
the locking tabs
(A) .
6. Repeat these steps until all memory
DIMMs have been installed.
11. Install the system processor assembly
1. Rotate the system processor assembly
handles
(A) to the open position.
2. Align the system processor assembly (B)
with the slot in the system frame.
3.
Carefully push on the system processor
assembly until you feel it lock into place.
4. Rotate the handles to the locked position
(C) .
Chapter 1. Removing and replacing FRUs
151