Bull ESCALA PL860T/R, Процедуры снятия и замены, Страница: 45 / 218

3.
Remove the disk drive:
1. Unlock the disk drive handle (A) and pull
the disk drive out toward you as shown.
2. Support the bottom of the disk drive as
you slide it out of the system or expansion
unit. Do not hold the disk drive by the
handle.
4.
Install the disk drive:
1. Support the bottom of the disk drive as
you align it with the guide rails in the
system unit. Do not hold the disk drive by
the handle.
2. Slide the disk drive into the system until it
stops.
3.
Push the disk drive handle in until it
locks.
Note: When you install a disk drive,
ensure that the drive is fully seated and all
the way into the system.
Chapter 1. Removing and replacing FRUs
37