Bull ESCALA PL860T/R, Процедуры снятия и замены, Страница: 22 / 218

30. Restore service processor settings
1. Reset any service processor settings that you may have set using operating system commands. You recorded these
settings at the beginning of this procedure.
2. If you choose to reset the HMC access password, do the following:
3.
a. From the HMC GUI (preferred method):
b.
v
Expand the Systems Management folder in the navigation tree pane.
v
Expand the Servers folder.
v
Select the server to be powered off. A list of server-related tasks will display in the Tasks pane.
v
Expand the Configuration folder in the Tasks pane.
v
Under the Configuration folder, click the Update Managed System Password task.
c. Or, from the HMC command line, type:
d.
chsyspwd -m managed system -t access --passwd --newpasswd newpassword
where:
v The value for managed system is the new service processor’s managed system name.
v No value for --passwd is entered thereby allowing authentication.
v The value for newpassword is the new password value.
31. Recover partition data on the FSP
Profile data stored in the managed server has been cleared or corrupted.
To recover profile data using the HMC, do the following:
1. Expand the Systems Management folder in the navigation tree pane.
2.
Double click on the
Servers
folder.
3.
Use the checkbox to select a server.
4.
Click on the Tasks drop-down menu that appears on the table toolbar.
5.
From the menu, select Recover Partition Data .
32.
Go to Verifying a repair.
Cache battery pack
Use this procedure to service the cache battery pack.
1. Begin with power on
To prevent data loss, the cache battery pack must be in an error state before it is removed from the system.
If you have powered the machine off, power it on before you continue.
14
Power Systems: IBM Power 550 Express (8204-E8A and 9409-M50) removal and replacement procedures