Bull ESCALA PL860T/R, Процедуры снятия и замены, Страница: 119 / 218

8. Install the daughter RAID card
1. Gently push the card (A) in the direction
shown straight into the enclosure.
2. Push the latch (B) in the direction shown
to tighten the card into its position.
9. Install the service access cover
1. Place the service access cover (A) on the
top of the system, about 25 mm (1 in.)
from the front of the system.
2.
Hold the service access cover against the
system unit and slide it toward the front
of the system. The tabs of the service
access cover slide beneath the upper
chassis ledge.
3. Align the two thumbscrews (B) located on
the back of the service access cover with
the two holes on the back of the system
chassis.
4. Tighten the thumbscrews to secure the
service access cover.
Chapter 1. Removing and replacing FRUs
111