Bull ESCALA PL860T/R, Процедуры снятия и замены, Страница: 151 / 218

Can you access the service network?
↓
Go to step 60
57. Access the ASMI
The Advanced System Management Interface (ASMI) is the interface to the service processor that is required to
perform general and administrator-level service tasks, such as reading service processor error logs, reading vital
product data, setting up the service processor, and controlling the system power. The ASMI may also be referred to
as the service processor menus.
To access the ASMI, refer to Accessing the Advanced System Management Interface.
When you have accessed the ASMI, continue with the next step.
58.
Go to step 62 on page 144.
59. Restore service processor settings
If the network connection uses DHCP to establish an IP address, but does not use an HMC as the DHCP server, do
the following:
1. Complete any network configuration necessary to allow the DHCP server to recognize and assign an IP address
to the service processor.
2. Ensure that the service processor is connected to the existing service network by verifying that the network cable
is connected to the network port on the service processor assembly.
3. If not already connected, connect all system power cables by plugging them into power outlets. Note: Do not
start the system at this time.
Can you access the service network?
No Yes
↓
Go to step 57
60. Restore service processor settings
You have indicated that you are still not able to access the service network.
You will need to reset the service processor network interfaces (and passwords) by pressing the pin-hole switch on
the control panel.
61.
Go to step 53 on page 142.
Chapter 1. Removing and replacing FRUs
143