Bull ESCALA PL860T/R, Процедуры снятия и замены, Страница: 42 / 218

Attention:
v
Attach a wrist strap to an unpainted metal surface of your hardware to prevent electrostatic
discharge (ESD) from damaging your hardware.
v
When using a wrist strap, follow all electrical safety procedures. A wrist strap is for static control. It
does not increase or decrease your risk of receiving electric shock when using or working on
electrical equipment.
v
If you do not have a wrist strap, just prior to removing the product from ESD packaging and
installing or replacing hardware, touch an unpainted metal surface of the system for a minimum of
5 seconds.
7. Squeeze and pull the handle of the disk drive out toward you before you remove the disk drive as
shown in Figure 5. If the handle is not all the way out, the disk drive will not slide out of the system
or expansion unit.
8. Support the bottom of the disk drive as you slide it out of the system or expansion unit. Do not hold
the disk drive by the handle.
9.
Press Enter on the IBM Power RAID Configuration Utility to indicate that you have removed the disk
drive.
Replacing the disk drive
1. Find the package that contains the new disk drive.
Attention: Disk drives are fragile. Handle them with care.
2. Remove the disk drive from its protective package.
3. Unlock the disk drive handle and pull the disk drive out toward you before you install the disk
drive. If the handle is not all the way out, the disk drive will not slide into the system or expansion
unit.
4. From the IBM Power RAID Configuration Utility display, select Work with disk unit recovery . Press
Enter.
Figure 5. Removing a disk drive from the system unit.
34
Power Systems: IBM Power 550 Express (8204-E8A and 9409-M50) removal and replacement procedures