Bull ESCALA PL860T/R, Процедуры снятия и замены, Страница: 126 / 218

System backplane
Use this procedure to service the system backplane.
1. Access the ASMI
The Advanced System Management Interface (ASMI) is the interface to the service processor that is required to
perform general and administrator-level service tasks, such as reading service processor error logs, reading vital
product data, setting up the service processor, and controlling the system power. The ASMI may also be referred to
as the service processor menus.
To access the ASMI, refer to Accessing the Advanced System Management Interface.
When you have accessed the ASMI, continue with the next step.
2. Check and record the server firmware and service processor settings
1. Check and record the admin user ID’s password.
2. Check and record the server firmware level prior to replacing this FRU. You may need to update the system to
the latest server firmware code level after you replace this FRU.
3.
Check and record the service processor settings you previously set using Advanced System Management (ASM).
This can be done using a Hardware Management Console (HMC) or PC to access ASM. You will need to reset
these service processor settings after you replace this FRU or the default settings will be used. Settings to record
include the following:
v System Name setting.
v System Power Control settings.
v System Service Aids settings.
v System configuration settings.
v Network Services settings.
v
Performance Option settings.
v
Login Profile settings.
4.
Record any service processor settings you may have set using operating system commands.
3. Power off the unit
Power should be removed from the unit containing the system backplane. If this unit is powered on, power it off
now.
118
Power Systems: IBM Power 550 Express (8204-E8A and 9409-M50) removal and replacement procedures