Adixen ASM 142, Руководство пользователя

Страница: 229 / 336

E 710
AMD1 Diaphragm pump maintenance
G
B
00896
-
E
d
it
io
n
03
-
J
un
e
08
Diaphragm
reassembly
n
Insert the new diaphragm between the attachment disk and the disk
support.
Take care to position the tight side of the diaphragm on the attachment
disk side.
n
Lift two opposite sides of the diaphragm so as to insert the
attachment disk/diaphragm/support disk in the diaphragm wrench.
Take care not to scratch or mark the diaphragm on the sealing side
during this operation.
A drop of
adhesive
n
Apply a drop of adhesive (Omnifit 50 M or Loctite 243) to the
threads of the diaphragm clamping disc screw.
n
If required, position the lock washer identified during the
disassembly on the connection rod.
Fasten the attachment disk/diaphragm/disk support subassembly.
Take care that the adjusting washer does not fall into the pump body
when the subassembly is performed.
n
Remove the diaphragm wrench.
n
Flatten the diaphragms.
Check valve
reassembly
Locate the position of head covers and casing cover.
Oblong hole
for inlet
Inlet
Exhaust
Circular hole
for exhaust
3/4