Adixen ASM 142, Руководство пользователя

Страница: 63 / 336

B 100
Safety instructions
GB
02451
-
E
d
it
io
n
03
-
J
une
08
CAUTION
Certain detectors are fitted with oil pumps: the oil load
needed for pump operation is in separate cans. We also
recommend that the user drains the pump before re-shipping
the equipment.
CAUTION
When relevant, remove the protection which blocks the
outlet of the pump, on the rear of the leak detector. We
recommended connecting this outlet to a gas evacuation
circuit for the oil seal pump. This circuit should have as little
excess pressure as possible (less than 0.3 bar).
CAUTION
Storage of the equipment: our equipment can be stored
without special precautions for up to 3 months (room
temperature between 5°C and 40°C). For longer periods,
factors such as humidity content, temperature, salty
atmosphere, etc., can cause damage to certain «sensitive»
parts (elastomer seals, lubricant, etc.).
CAUTION
Check the pumping conditions of the detector: the leak
detectors are not equipped for pre-pumping of corrosive
gases, condensable vapours of liquids, even in small
quantities.
CAUTION
The manufacturer can not take any responsability or apply
any warranty on a leak detector which is used with a
presence of corrosive or dangerous gases: all our leak
detectors are not designed to pump dangerous substances.
WARNING
A helium leak detection operation must be made in a safe
environment for the user and the equipment: all precautions
must be taken by the user of the leak detector in that respect
(especially to eliminate the presence of chemicaly, aggressive,
toxic or hazardous substance prior to the test operation).
The manufacturer has no control over the types of gases passing
through the pumps.
CAUTION
Ensure that parts or enclosures connected to the inlet of the
detectors can handle a pressure drop of 1 bar relative to
atmospheric pressure.
CAUTION
If the detector rotates in an axis perpendicular to the axis of
rotation of the secondary pump, there is a risk of seizure of
the secondary pump.
2/6