Adixen ASM 142, Руководство пользователя

Страница: 139 / 336

C 400
G
B
01364
-
E
d
it
io
n
05
-
J
un
e
08
Remote control
Remote control
connecting
In order to use the remote control with control panel with graphic
interface, it is necessary to connect the remote control before starting
up the detector.
Location and connecting B 210
Remote control choice
3 different units could be selected in the leak detector but only one
unit is available on the remote control.
So the operator should choice its remote control in accordance of the
operation unit chosen.
Unit C 570
Accessories A 700
When the operator connects the remote control on the leak detector,
the leak detector unit is automatically reprogrammed with the unit
of the remote control. The remote control unit is memorized by the
detector when the operator disconnects the remote control.
Use and display
CYCLE
Analog and digital displays
To start/stop a cycle
The remote control:
• allows to display leak measured value ,
• allows to start/stop cycle, zero function and internal calibration,
• allows to display status of the air inlet vent, sniffing test mode and
external calibration,
• doesn’t allow to adjust leak detector parameters.
On remote control and control panel, the displayed values on the
analog and digital displays are exactly the same.
Operation of the leak detector C 211
In order to start/stop a cycle, operator can use either the CYCLE
control key on the control panel or remote control.
Display
The LED indicator is ON/OFF when the control key is activated/
deactivated.
As soon as the detector is in test, the TEST indicator is ON.
2/3