manualshive.com logo in svg

YSI SonTek RiverSurveyor, System Manual

Share
Download
YSI SonTek RiverSurveyor System Manual Download Page 86

SonTek/YSI Inc 

RiverSurveyor System Manual (May 1, 2007) 

74

6.2. 

Mounting the RiverSurveyor ADP to the Vessel 

The following topics are covered in this section: 

• 

What types of mounts are used? 

• 

What are the requirements for the ADP mount? 

6.2.1.  What types of mounts are used? 

Mounting the ADP can be a simple or complex task depending on the type of boat used and 
quality of the mount. ADP boat-mounted designs range from a simple assembly of small PVC 
pipes and joints attached to a wood plank, to rugged 2-inch aluminum pipe-and-joint assemblies 
mounted to solid aluminum/wood braces (

Figure 6-1

, 

Figure 6-2

, 

Figure 6-3

). 

Typically, a simple ADP boat mount is based on the dimensions of the boat (e.g.; draft, water-
line, width and stability of the gunnels) along with a few basic mounting requirements. 

Figure 6-1. Bow-mounted, aluminum pipe and fittings with 12"x12" PVC mounting plate 

(Colorado River, Lake Havasu, Arizona) 

Summary of Contents for SonTek RiverSurveyor



































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands