YSI SonTek RiverSurveyor, System Manual

Page: 126 / 194

SonTek/YSI Inc
RiverSurveyor System Manual (May 1, 2007)
114
7.3.4. ADP Configuration Menu
The
ADP Configuration Menu
has the following options.
Standard Information
This dialog box (
Figure 7-24
) gives an overview of the data
collected in the file:
•
File Name
•
File Size
•
Number of Profiles collected in file
•
Time of First Profile in file
•
Time of Last Profile in file
•
Comments entered during setup
•
GPS Data Present in file – Yes/No
•
Bottom Track Data Present in file – Yes/No
•
CTD Data Present in file – Yes/No
•
Wave Data Present in file – Yes/No
•
External Sensor Data Present in file – Yes/No
Hardware Configuration
This dialog box (
Figure 7-25
) lists the configuration of
the ADP hardware during data collection:
•
CPU Software Version – Central Processing Unit
firmware version
•
DSP Software Version – Digital Signal Processor
firmware version
•
Board Revision
•
Serial Number of instrument
•
System Frequency
•
Number of Beams – 2, 3, or 4 beams
•
Beam Geometry – 2, 3, or 4 beams
•
Slant Angle – Angle of beams in relation to housing
•
Sensor Orientation – Up, down, or side-looking
•
Compass Installed – Yes/No
•
Recorder Installed – Yes/No
•
Temperature Sensor Installed – Yes/No
•
CTD Sensor Installed – Yes/No
•
Pressure Sensor Installed – Yes/No
•
Pressure Offset in dbar
•
Pressure Scale in dbar/count
•
Pressure Scale 2 in pdbar/c
2
•
External Pressure Sensor Installed – Yes/No
•
External Sensor Installed – Yes/No
•
Transformation Matrix
Figure 7-24. Standard Information
dialog box
Figure 7-25. ADP Hardware Configuration
dialog box