manualshive.com logo in svg

YSI SonTek RiverSurveyor, System Manual

Share
Download
YSI SonTek RiverSurveyor System Manual Download Page 65

SonTek/YSI Inc 

RiverSurveyor System Manual (May 1, 2007) 

53

Section 4.  RiverSurveyor Applications 

This section describes the types of applications where RiverSurveyor systems are used, including 
suggested settings and specific examples. Overall, the topics in Section 4 are written as a brief 
summary for new users of this technology. In many cases, each section listed below could easily 
be expanded more thoroughly. However, if you are interested in more extensive explanations, we 
would suggest that you attend one of our training courses (held throughout the year). The U.S. 
Geological Survey also conducts similar training courses specific to their applications. If you are 
interested in attending a “hands on” training session, please 

contact us

. 

The following topics are covered in Section 4. 

• 

Section 

4.1

 – 

Stream (River) Gauging and RiverSurveyor Discharge Measurements

 

• 

Section 

4.2

 – 

Computer Modeling and Verification

 

• 

Section 

4.3

 – 

River Condition Considerations

 

Figure 4-1. Collecting RiverSurveyor discharge data on the Paraná River, Guiará, Paraná State, Brazil 

Summary of Contents for SonTek RiverSurveyor



































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands