manualshive.com logo in svg

YSI SonTek RiverSurveyor, System Manual

Share
Download
YSI SonTek RiverSurveyor System Manual Download Page 3

SonTek/YSI Inc 

 

RiverSurveyor System Manual (May 1, 2007) 

iii

Release Notice 

This is the May 1, 2007 release of the 

RiverSurveyor System Manual

. It is designed for use with 

version 4.60 of the 

RiverSurveyor

 software program. 

** – Note that throughout this manual, items marked with double asterisks (**) are not available 
in version 4.60. These items will be available in a future release. 

Trademarks 

The terms SonTek, ADP, ADV, and Argonaut are registered trademarks of SonTek/YSI, Inc. All 
rights are reserved. All other brand names are trademarks of their respective holders. 

Warranty, Terms, and Conditions 

The system you have purchased is covered under a one year limited warranty that extends to all 
parts and labor for any malfunction due to workmanship or errors in the manufacturing process. 
The warranty does not cover shortcomings that are due to the design, nor does it cover any form 
of incidental damage as a result of errors in the measurements. 

If your system is not functioning properly, first try to identify the source of the problem. If addi-
tional support is required, we encourage you to contact us immediately, and we will work to re-
solve the problem as quickly as possible. 

If the system needs to be returned to the factory, please contact SonTek/YSI to obtain a Return 
Merchandise Authorization (RMA) number. We reserve the right to refuse receipt of shipments 
without RMAs. We require the system to be shipped back in the original shipping container us-
ing the original packing material with all delivery costs covered by the customer (including all 
taxes and duties). If the system is returned without appropriate packing, the customer will be re-
quired to cover the cost of a new packaging crate and material. 

Summary of Contents for SonTek RiverSurveyor



































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands