YSI SonTek RiverSurveyor System Manual Download Page 123

Page: 123 / 194

SonTek/YSI Inc

RiverSurveyor System Manual (May 1, 2007)

111

Note

: The

Beam

selection shows the selected component based on velocity coor-

dinate system (§

3.9

). Available for the

Velocity

Signal

, and

SNR

displays; how-

ever, not available if the

View|

User Specified Rotation

option is activated.

•

Average

– Shows the average of all beams. Available only for the

Signal

and

SNR

displays.

•

Speed

– Shows the average water current velocity from all beams. Available only for the

Velocity

display.

•

Direction

– Shows the average water current direction from all beams. Available only for the

Velocity

display.

Show Waypoints (Ctrl+W)

When selected, this option opens the

Waypoints

dialog box (

Figure 7-21

). Use this option to add,

edit, or delete waypoints. To change an entry, click on the appropriate field and then edit its en-
try. This box also lets you

Load

a previously saved waypoints file (*.way), or

Save

the current

set of waypoints. For more information on waypoints and their use, see §

7.5

Figure 7-21.

Waypoinsts

dialog box

Summary of Contents for SonTek RiverSurveyor



































































































































































































Search results

Summary of Contents for SonTek RiverSurveyor

Reviews:

Brands by name

Popular brands

YSI SonTek RiverSurveyor, System Manual

Search results

Summary of Contents for SonTek RiverSurveyor

Reviews:

Brands by name

Popular brands