YOKOGAWA TA720 User Manual Download Page 140

Page: 140 / 228

11-2

IM 704510-01E

11.2 Using the PC Card (Optional)

On models with the optional “Ethernet int PC card drive (/C10 option),” setup

parameters, measured results, statistical calculation results, and screen image can be

saved to the PC card. Data saved to the PC card can be accessed from a PC via the

Ethernet network.

PC Cards That Can Be Used

The TA720 supports flash ATA cards (PC card TYPE II) and compact flash (using the

PC card TYPE II adapter). However, the use of micro drives by attaching a PC card

adapter or a PC card type HDD is not possible.

For details, contact your nearest YOKOGAWA dealer as listed on the back cover of this

manual.

Note

Note that the PC card that is used with the TA720 may not be recognized by some PC types.

Installing the PC Card

The PC card slot is located on the rear panel of the TA720.

With the label of the PC card facing up, insert the card securely into the PC card drive.

An electric sound is heard when the PC card is recognized.

Ejecting the PC card

Check that the PC card is not being accessed, and eject the PC card.

To eject the PC card, press the eject button once to force the button to pop out. Then,

press the eject button again. When the PC card is ejected, an electric sound (different

from the sound of installation) is heard.

PC card

Eject button

CAUTION

• The TA720 may malfunction if the PC card is frequently inserted and ejected

(inserted and ejected within a 5-s time period).

• Removing the PC card while it is being accessed may destroy the data on the

PC card.

General Handling Precautions of PC Cards

For the general handling precautions of the PC card, read the instruction manual that

came with the PC card.

Summary of Contents for TA720





































































































































































































































Search results

Summary of Contents for TA720

Reviews:

Related manuals for TA720

Brands by name

Popular brands

YOKOGAWA TA720, User Manual

Search results

Summary of Contents for TA720

Reviews:

Related manuals for TA720

Brands by name

Popular brands