YOKOGAWA TA720 User Manual Download Page 88

Page: 88 / 228

6-12

IM 704510-01E

6.6

Setting the Input Coupling, Input Impedance,
and Trigger

For a functional description, see 2.5.

Procedure

Press the INPUT key to display the Input menu.

Selecting the Source Channel

Press the Setting soft key to display the Input Setting menu.

Press the ChA or ChB soft key.

Selecting the Input Impedance

Press the Impedance soft key to select the input impedance.

Selecting the Input Coupling

Press the Coupling soft key to select the input coupling.

Selecting the Trigger Mode

Press the Trigger soft key to display the Trigger menu.

Press the soft key corresponding to the desired trigger mode.

Setting the Trigger Level

Press the Level soft key and then set the trigger level using the rotary knob or

numeric keys.

Explanation

Selecting the Source Channel

Select the channel, CH A or CH B, for setting the input conditions.

Selecting the Input Impedance

Select 50

Ω

or 1 M

Ω

Note

The input impedance of the external arming input (EXT ARM), external gate input (EXT

GATE), and inhibit input (INHIBIT) is fixed to 1 M

Ω

Select the Input Coupling

Select AC or DC.

Note

The frequency characteristics vary depending on the input impedance and input coupling

settings. For a description of the frequency characteristics, see page 15-1.

Summary of Contents for TA720





































































































































































































































Search results

Summary of Contents for TA720

Reviews:

Related manuals for TA720

Brands by name

Popular brands

YOKOGAWA TA720, User Manual

Search results

Summary of Contents for TA720

Reviews:

Related manuals for TA720

Brands by name

Popular brands