YOKOGAWA TA720 User Manual Download Page 63

Page: 63 / 228

4-4

IM 704510-01E

4.4

Entering Values and Character Strings

Setting Values Using the Rotary Knob

SET

SELSC

sec/V/

MHz

ENTER

Rotary knob

Numeric keys

When a mark or mark appears on the soft key, set the value using the rotary knob.

If the value consists of many digits, you can use the arrow keys (

) below the rotary

knob to move among the digits (the current digit is highlighted). You can also turn the

rotary knob to increase the value of the current digit and cause a carry over.

Setting Values Using the Numeric Keys

If a icon is displayed on the soft key menu, press a numeric key to display a value

entry area (see the previous page). After entering the value, press a unit key or the

ENTER key to confirm the setting.

If you press another key before pressing a unit key or the ENTER key, the value that you

were trying to enter is not confirmed, and the screen returns to the original condition. If

you press the RESET key above and to the left of the rotary knob before confirming the

value, the value is cleared.

The left arrow key below the rotary knob acts as a backspace key.

Setting Character Strings (Using the Keyboard)

Pressing the SELECT key that is above and to the right of the rotary knob when the entry

box of a file name or comment is selected displays a keyboard on the screen as shown

in the following figure.

Character string entry box

INSERT indicator

Procedure for Setting Character Strings

Turn the rotary knob to highlight the character you wish to enter.

If a character string is already entered such as a file name, use the arrow keys

to move the cursor (highlighted section) to the position you wish to make an

entry. If you wish to clear the entire character string that is already entered,

press the RESET key that is above and to the left of the rotary knob.

Press the SELECT key to display the selected character in the character string

entry box.

Repeat steps 1 and 2 to enter all the characters in the character string entry

box.

Move the cursor to [ENT] on the keyboard and press the SELECT key that is

above and to the right of the rotary knob.

The character string is confirmed and the keyboard disappears.

Functions of the Keys Other than the Characters on the Keyboard

DEL:

Deletes the character immediately before the cursor.

INS:

Switches the insert/overwrite mode. When in insert mode, the INSERT

indicator on the keyboard illuminates.

CLR:

Clears all the characters that are displayed.

SPACE:

Enters a space.

ENT:

Confirms the displayed characters.

CAPS:

Switches between upper case and lower case.

Summary of Contents for TA720





































































































































































































































Search results

Summary of Contents for TA720

Reviews:

Related manuals for TA720

Brands by name

Popular brands

YOKOGAWA TA720, User Manual

Search results

Summary of Contents for TA720

Reviews:

Related manuals for TA720

Brands by name

Popular brands