YOKOGAWA TA720 User Manual Download Page 18

Page: 18 / 228

1-6

IM 704510-01E

Panorama display

Displays the entire measured data. For a description of the panorama display,

see page 2-17; for the procedure for turning ON/OFF the panorama display, see

section 7.1, “Setting the Histogram Display.”

Statistics display

Statistical values can also be displayed along with the histogram display. For a

description of the statistical computation, see page 2-21.

For the procedure for turning ON/OFF the statistics display, see section 7.1,

“Setting the Histogram Display.”

X-axis span (X span)

It is possible to set the window range (scale) to be displayed.

For the procedure for changing the scale values, see section 8.4, “Changing the

Scale Values of the Histogram Display and Time Variation Display.”

Readout values

Shows the readout values of the X1 and X2 markers. For a description of

reading the measured results using markers, see page 2-19; for the procedure

for reading the values using the cursors, see section 8.5, “Reading the

Measured Results Using Markers.”

10.

X-axis center

It is possible to set the center value of the X-axis of the histogram display. For

the procedure for changing the scale values, see section 8.4, “Changing the

Scale Values of the Histogram Display and Time Variation Display.”

11.

Window setup parameters

Shows the window mode, constant T, and the polarity of the measurement function.

For the procedure for setting the window, see section 8.1, “Setting the Single Window,”

8.2, “Setting the Multi Window,” or 8.3, “Setting the Auto Window.”

12.

Y-axis maximum

It is possible to set this value using the log scale or linear scale.

For the procedure for changing the scale values, see section 8.4, “Changing the

Scale Values of the Histogram Display and Time Variation Display.”

13.

Zoom box

The waveform in the zoom box is displayed zoomed in the main window.

14.

Soft key menu

Corresponds to the soft key on the front panel.

List Display in Hardware Histogram Mode (For a description of the list display, see page 2-14)

Setup parameters

Data number

Median value Frequency

Y-axis maximum

X-axis span

Histogram display

X-axis center

1.3 Display

Summary of Contents for TA720





































































































































































































































Search results

Summary of Contents for TA720

Reviews:

Related manuals for TA720

Brands by name

Popular brands

YOKOGAWA TA720, User Manual

Search results

Summary of Contents for TA720

Reviews:

Related manuals for TA720

Brands by name

Popular brands