manualshive.com logo in svg

YOKOGAWA TA720, User Manual

The YOKOGAWA TA720 User Manual is available for free download on our website. This comprehensive manual provides detailed instructions and essential information for operating the TA720 device. Accessible through manualshive.com, users can effortlessly download this invaluable resource to enhance their experience with this remarkable product.

Share
Download
background image

11-18

IM 704510-01E

Selecting the Files to Be Deleted

7.

Turn the rotary knob to select the file or directory you wish to delete and press

the SET/RESET soft key.

An asterisk appears to the left of the file name.  Press the Set/Reset soft key

again to remove the asterisk.

To delete all the files that are displayed, press the All Set soft key.  Press the

All Reset soft key again to reset the selection.  The asterisk marks disappear.

If you wish to prevent a file from being deleted, select the file, press the Attr soft

key, and set the file attribute to R (read only).  Pressing the Attr soft key again

resets the attribute to R/W (read and write).

If you wish to view the file attribute before deleting the file, press the Property

soft key.

Executing the Delete Operation

8.

Press the Del Exec soft key.

All files with asterisks are deleted.

Note

When Filter is set to *.WVF and you delete measured result data files (files with .wvf

extension), the corresponding header files (files with .hdr extension) are also deleted.

CAUTION

Do not remove the storage medium or turn OFF the power while files are being

deleted (while 

 is blinking).  Such acts can damage the storage medium or

destroy the data on the storage medium.

Explanation

Specifying the Files to Be Listed (Filter)

The type of files to be listed can be specified.

• *.XXX: Displays only the files with the type of data (Setup, Measure, or Statistics)

specified by File Item in the File menu.

• *.*:

Displays all the files in the storage medium.

11.7  Deleting Files and Directories

Summary of Contents for TA720





































































































































































































































Reviews:

No comments

Related manuals for TA720

ABB Endura AZ20 series Instruction preview
Endura AZ20 series
Brand: ABB Pages: 8
Samson 2100 Series Technical Service Manual And Spare Parts Listing preview
2100 Series
Brand: Samson Pages: 4
Keithley 236 Applications Manual preview
236
Brand: Keithley Pages: 201
Hach DR 3900 Basic User Manual preview
DR 3900
Brand: Hach Pages: 145
Hach ORBISPHERE 410 Basic User Manual preview
ORBISPHERE 410
Brand: Hach Pages: 358
Hach Polymetron 9582sc Basic User Manual preview
Polymetron 9582sc
Brand: Hach Pages: 280
HACH LANGE DR 3900 Quick Reference Manual preview
DR 3900
Brand: HACH LANGE Pages: 15
VEE GEE BX-3 Operation Manual preview
BX-3
Brand: VEE GEE Pages: 2
E Instruments E4500 Operating & Maintenance Manual preview
E4500
Brand: E Instruments Pages: 144
Aqua Lung PHODS Technical Manual preview
PHODS
Brand: Aqua Lung Pages: 24
Fly Henry Fly Meter Manual preview
Fly Meter
Brand: Fly Henry Pages: 5
Hanna Instruments HI 708 Instruction Manual preview
HI 708
Brand: Hanna Instruments Pages: 2
Interacoustics AT235 Instructions For Use Manual preview
AT235
Brand: Interacoustics Pages: 60
Monnit Alta Site Survey Tool User Manual preview
Alta Site Survey Tool
Brand: Monnit Pages: 15
Ratek TH8000 User Manual preview
TH8000
Brand: Ratek Pages: 25
East Tester ET45 Series User Manual preview
ET45 Series
Brand: East Tester Pages: 27
ICP DAS USA PM-3133-MTCP User Manual preview
PM-3133-MTCP
Brand: ICP DAS USA Pages: 71
CONDTROL xMarker User Manual preview
xMarker
Brand: CONDTROL Pages: 11

Brands by name

Popular brands

Load more brands