3-4
IM 704510-01E
Storage Location
When storing the instrument, avoid the following places:
• Where the relative humidity is 80% or more.
• In direct sunlight.
• Where the temperature is 60
°
C or higher.
• Near a high humidity or heat source.
• Where the level of mechanical vibration is high.
• Where corrosive or explosive gas is present.
• Where an excessive amount of soot, dust, salt, and iron are present.
• Where water, oil, or chemicals may splash.
It is recommended that the instrument be stored in an environment where the temperature
is between 5 and 40
°
C and the relative humidity is between 20 and 80% RH.
Installation Position
WARNING
To avoid the possibility of fire, never use the instrument with the rear side facing
down, as the cooling vents will be obstructed. There are inlet holes for the
cooling fan on the rear panel. Placing the instrument with the rear side down
can cause a fire when the instrument malfunctions. If you must use the
instrument with the rear panel down, place a metal plate or a flame-resistive
barrier (grade UL94V-1 or higher) beneath the instrument.
Place the instrument in a horizontal position or inclined position using the stand as
shown in the center of the figure below.
When using the stand, pull it forward until it locks (perpendicular to the bottom surface of
the instrument). If you are installing the instrument on a slippery surface, attach the
rubber feet (four pieces, included in the package) to the feet.
If you are not using the stand, return it to the original position while pressing the leg
section of the stand inward.
Stand
3.2 Installing the TA720
