1-4
IM 704510-01E
RE
SET
SELSC
T
Rotary Knob
Rotary Knob (Section 4.3 and 4.4)
Used to set a value, move the cursor, select files, and etc. The rotary knob can be
used when a “ ” or “ ” mark is shown on the menu (the numeric keys can also be
used).
SELECT Key (Section 4.3 and 4.4)
Used to set the item that is selected using the rotary knob and for other purposes.
RESET Key (Section 4.3 and 4.4)
This key is pressed when setting a value entered through the numeric keys and when
confirming the value.
<> Key
Used to move along the digits when setting a value and for other purposes.
sec/V/
MHz
ENTER
0
1
2
3
m
4
5
6
7
8
9
n
Numeric Keys (Sections 4.3 and 4.4)
Used when entering values. Press the “0” to “9”, and “.” keys to enter the value and
decimal point (as necessary), and press the “ENTER” key to set the value. To set
prefix symbols n,
µ
, or m or units MHz, sec, V, and % when entering a value, press
the key with the corresponding marking. If a sign is required, press the +/– key.
Note
To enter the MHz unit, the SHIFT key must be pressed first.
1.2 Setting/Execution Key and Rotary Knob
