YOKOGAWA TA720 User Manual Download Page 176

Page: 176 / 228

12-6

IM 704510-01E

Notes on Setting the FTP Client Function

• The client cannot move above the home directory.

• The newest file is not necessarily displayed at the top of the file list.

• File and directory names that exceed 8 characters, the characters beyond the 7th

character are displayed as >. The entire file name can be confirmed by viewing

properties.

• Depending on the server, “<..>” that indicates a higher directory may not be displayed.

• The time information in the file list will not be displayed correctly for the following

cases.

• On Windows NT when the time stamp is displayed using am and pm.

• Servers that return characters other than ASCII characters in the list

• The following operations cannot be performed.

• Turning file protect ON and OFF on saved files.

• Formatting a network drive.

• Copying between network drives.

• Renaming a file on the network.

• This function cannot be used when the FTP server function or file operation function is

used.

• To use this function, configure the TCP/IP settings beforehand according to section

12.2, “Setting up the TCP/IP.”

• To apply new settings that are made while the connection is up, drop the connection

using Disconnect and reconnect.

• If you are disconnected by the server when using the FTP client, you will be

automatically reconnected if you perform a file operation.

12.3 Setting the Network Drive (FTP Client Function)

Summary of Contents for TA720





































































































































































































































Search results

Summary of Contents for TA720

Reviews:

Related manuals for TA720

Brands by name

Popular brands

YOKOGAWA TA720, User Manual

Search results

Summary of Contents for TA720

Reviews:

Related manuals for TA720

Brands by name

Popular brands