YASKAWA LA700 Series, Installation And Operation Instruction Manual, Page: 351 / 378

10 Attachment
YASKAWA TOMPYEULA7002A LA700 Series Installation and Operation Instruction 351
Table 10.1 Recommended Wiring Tools
Screw Size
and Shape
Adapter
Bit
Torque Driver Model
(Tightening Torque)
Torque Wrench
Model Manufacturer
M4
Bit
SF-BIT-SL 1,0X4,0-
70
PHOENIX
CONTACT
TSD-M 3NM
(1.2 - 3 N∙m (10.6 - 26.6 lbf∙in))
N/A
M5
*1
Bit
SF-BIT-SL 1,2X6,5-
70
PHOENIX
CONTACT
Wire Gauge ≤25 mm 2 (AWG 10):
TSD-M 3NM
(1.2 - 3 N∙m (10.6 - 26.6 lbf∙in))
Wire Gauge ≤ 25 mm 2 (AWG 10):
N/A
Wire Gauge ≥30 mm
2
(AWG 8):
N/A
Wire Gauge ≥ 30 mm
2
(AWG 8):
4.1 - 4.5 N∙m (36.3 - 39.8 lbf∙in)
*2 *3
M6
Bit SF-BIT-HEX 5-50
PHOENIX
CONTACT
N/A 5 - 9 N∙m (44.3 - 79.9 lbf∙in)
*2 *3
M6
Bit
SF-BIT-SL 1,2X6,5-
70
PHOENIX
CONTACT
N/A 3 - 3.5 N∙m (26.6 - 31.0 lbf∙in)
*2 *3
M8
Bit SF-BIT-HEX 6-50
PHOENIX
CONTACT
N/A 8 - 12 N∙m (70.8 - 106.2 lbf∙in)
*2 *3
M10
Bit SF-BIT-HEX 8-50
PHOENIX
CONTACT
N/A 12 - 14 N∙m (106.2 - 123.9 lbf∙in)
*2 *3
*1 When wiring drive models 2059, 4094, and smaller, select the correct tools for the wire gauge.
*2 Use 6.35 mm (0.25 in) bit socket holder.
*3 Use a torque wrench that can apply this torque measurement range.
Closed-Loop Crimp Terminals
To comply with UL standards on drive models 2269 to 2519 and 4225 to 4380, use UL Listed closed-loop crimp
terminals and insulation caps. Use the tools recommend by the terminal manufacturer to crimp the closed-loop
crimp terminal. Yaskawa recommends closed-loop crimp terminals from JST Mfg. Co., Ltd. and insulation caps
from Tokyo DIP Co., Ltd.
Make sure that you comply with local standards for correct wire gauges in the region where you will use the drive.
Contact Yaskawa or your nearest sales representative to order.
Refer to Table 10.2 and Table 10.3 to select crimp terminals as specified by drive model and wire gauge.
Note:
To comply with UL standards, use only insulated crimp terminals or crimp terminals with insulation tubing. Use UL-Listed, vinyl-
coated insulated copper wires for operation with a continuous maximum permitted temperature of 75 °C at 600 V.
Table 10.2 Closed-Loop Crimp Terminals and Insulation Caps: Three-Phase 200 V Class
Model
Recomm. Gauge (AWG, kcmil)
Terminal
Screw Size
Crimp
Terminal
Model
Crimping Tool
Insulation
Cap Model
R/L1
S/L2
T/L3
U/T1
V/T2
W/T3
-, +1 +3 Tool Model Die Jaw
2022 - - - - 10 M4 R5.5-4 YA-4 AD-900 TP-005
2031, 2041 - - - - 8 M5 R8-5 YA-4 AD-901 TP-008
2059 - 2110 - - - - 6 M6 R14-6 YA-4 AD-902 TP-014
2144 - - - - 4 M6 R22-6 YA-5 AD-953 TP-022
2181, 2225 - - - - 4 M8 R22-8 YA-5 AD-953 TP-022
2269
2/0 × 2P 2/0 × 2P - - - M10 80-10
YF-1
YET-150-1
TD-227, TD-
214
TP-080
- - 4/0 × 2P - - M10 R100-10
YF-1
YET-150-1
TD-228, TD-
214
TP-100
- - - 1/0 × 2P - M10 R60-10
YF-1
YET-150-1
TD-225, TD-
213
TP-060
- - - - 3 M10 R38-10
YF-1
YET-150-1
TD-224, TD-
212
TP-038