Yamaha WR426F(N), Owner'S Service Manual

Page: 254 / 762

3 - 11
INSP
ADJ
THROTTLE LUBRICATION
2. Adjust:
●
Throttle grip free play
Throttle grip free play adjustment steps:
●
Remove the throttle cable cap 1 and
throttle cable cover 2 .
NOTE:
●
Before adjusting the throttle cable free
play, the engine idle speed should be
adjusted.
●
When the motorcycle is accelerating,
throttle cable #1
3 is pulled and throttle
cable #2 4 is pushed.
1st step:
●
Loosen the locknuts 5 on throttle cable #2.
●
Adjust the free play by changing their
tightening position.
2nd step:
●
Loosen the locknuts 6 on throttle cable #1.
●
Adjust the free play by changing their
tightening position.
●
Tighten the locknuts.
WARNING
After adjusting, turn the handlebar to
right and left and make sure that the
engine idling does not run faster.
●
Install the throttle cable cover and throttle
cable cap.
1
2
EC35S002
THROTTLE LUBRICATION
1. Remove:
●
Rubber cover 1
●
Throttle cable cap 2
2. Apply:
●
Lithium soap base grease
On the throttle cable end
a
.
3. Install:
●
Throttle cable cap
●
Screw (throttle cable cap)
●
Rubber cover
T
R .
.
4 Nm (0.4 m · kg, 2.9 ft · lb)