Yamaha WR426F(N), Owner'S Service Manual

Page: 620 / 762

5 - 38
CHAS
FRONT FORK
21. Measure:
●
Distance
a
Out of specification
→
Turn into the
locknut.
Distance
a
:
20 mm (0.79 in) or more
Between damper rod
1 top and
locknut
2
top.
22. Loosen:
●
Rebound damping adjuster 1
NOTE:
●
Loosen the rebound damping adjuster finger
tight.
●
Record the set position of the adjuster (the
amount of turning out the fully turned in posi-
tion).
23. Install
●
Cushion rubber 1
●
Washer 2
●
Spacer
3
To cap bolt 4 .
NOTE:
Install the cushion rubber with its smaller dia.
end
a
facing the cap bolt.
24. Install:
●
Push rod 1
●
Fork spring 2
NOTE:
●
Install the fork spring with the damper rod 3
pulled up.
●
After installing the fork spring, hold the
damper rod end so that it will not go down.
25. Install:
●
Cap bolt 1
Fully tighten the cap bolt onto the
damper rod by hand.