Yamaha WR426F(N), Owner'S Service Manual

Page: 506 / 762

4 - 86
ENG
CDI MAGNETO
4. Connect:
●
CDI magneto lead
Refer to “CABLE ROUTING DIA-
GRAM” section in the CHAPTER 2.
5. Install:
●
Gasket [crankcase cover (left)]
●
Crankcase cover (left) 1
●
Hose holder (cylinder head breather
hose)
2
●
Bolt [crankcase cover (left)]
NOTE:
Tighten the screws in stage, using a crisscross
pattern.
New
T
R
.
.
10 Nm (1.0 m · kg, 7.2 ft · lb)
6. Install:
●
Shift pedal 1
●
Bolt (shift pedal)
NOTE:
When installing the shift pedal onto the shift
shaft, be sure that the center of the shift pedal
is about 2 mm
a
above the top of the footrest.
7. Install:
●
Engine guard (left) 1
●
Hose holder (cylinder head breather
hose)
2
●
Bolt [engine guard (left)]
1
2
T
R
.
.
23 Nm (2.3 m · kg, 17 ft · lb)