Yamaha WR426F(N), Owner'S Service Manual

Page: 554 / 762

5 - 5
CHAS
FRONT WHEEL AND REAR WHEEL
EC595000
ASSEMBLY AND INSTALLATION
Front wheel
1. Install:
●
Bearing (left) 1
●
Spacer 2
●
Bearing (right) 3
●
Oil seal 4
NOTE:
●
Apply the lithium soap base grease on the
bearing and oil seal lip when installing.
●
Use a socket that matches the outside diam-
eter of the race of the bearing.
●
Left side of bearing shall be installed first.
●
Install the oil seal with its manufacture’s
marks or numbers facing outward.
CAUTION:
Do not strike the inner race of the bearing.
Contact should be made only with the outer
race.
2. Install:
●
Brake disc 1
●
Bolt (brake disc) 2
NOTE:
Tighten the bolts in stage, using a crisscross
pattern.
New
T
R
.
.
12 Nm (1.2 m · kg, 8.7 ft · lb)
3. Install:
●
Collar 1
NOTE:
●
Apply the lithium soap base grease on the oil
seal lip.
●
Install the collar with their projection
a
fac-
ing the wheel.
4. Install:
●
Trip meter gear unit 1
NOTE:
Make sure the two projections
a
in the wheel
hub are meshed with the two slots
b
in the trip
meter gear unit.
b
a
1