Xerox C123 Copycentre User Manual Download Page 213

Page: 213 / 360

Network Settings

Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 User Guide

213

TCP/IP - Subnet Mask

Allows you to enter the subnet mask in the form of vvv.xxx.yyy.zzz.

TCP/IP - Gateway Address

Allows you to enter the gateway address in the form of vvv.xxx.yyy.zzz.

TCP/IP - IP Filter

Specify whether to restrict the remote machines which send print jobs using LPD.

HTTP - SSL/TLS Communication

Specify whether to enable the SSL/TLS communication.

HTTP - SSL/TLS Port Number

Allows you to enter the port number for the SSL/TLS communication within the range
of 443, 8000–9999.

Machine E-mail Address/Host Name

This feature allows you to set e-mail address, host name, or domain name for the
machine.

Select [Machine E-mail
Address/Host Name] on the
[Network Settings] screen.

Perform the necessary
operations.

Select [Close].

E-mail Address

Allows you to enter the e-mail address of the machine up to 128 characters.

Host Name

Allows you to enter the host name of the machine up to 64 characters.

Domain Name

Allows you to enter the domain name of the machine up to 64 characters.

Summary of Contents for C123 Copycentre









































































































































































































































































































































































Search results

Summary of Contents for C123 Copycentre

Reviews:

Related manuals for C123 Copycentre

Brands by name

Popular brands

Xerox C123 Copycentre, User Manual

Search results

Summary of Contents for C123 Copycentre

Reviews:

Related manuals for C123 Copycentre

Brands by name

Popular brands