Xerox C123 Copycentre User Manual Download Page 182 | Manualshive

Page: 182 / 360

background image

10 Paper and Other Media

182

Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 User Guide

Tandem Tray Module (TTM)

The Tandem Tray Module allows you to load larger amounts of paper. It consists of two
trays.

NOTE:

You cannot load custom size paper into the Tandem Tray Module.

1.

Pull out the Tray 3 or Tray 4 of
TTM.

The elevator in the tray lowers.

2.

Place the paper stock tightly
against the left rear corner of the
tray.

NOTE:

Do not load paper above the

maximum fill line.

NOTE:

Always load paper into the tray in the orientation shown in the diagram.

3.

Close the tray.

The elevator rises and positions the paper for use.

Auto Tray Switching

The machine automatically switches from one tray to another under the following
condition.

•

When printing and the active tray runs out of paper.

•

When the paper size sensed differs from the previously determined size.

•

When paper feeding starts and the selected tray is open.

•

When paper feeding starts and the selected tray malfunctions.

NOTE:

The bypass tray cannot be used with Auto Tray Switching.

NOTE:

Key Operator access is required to set target trays and priorities. For more

information, refer to

Paper Tray Priority in the Setups chapter on page 193

and

Paper

Type Priority in the Setups chapter on page 194.

When not in use, the paper trays can be opened and paper can be loaded while the
machine is running. However, do not open the active tray. This will cause the machine
to stop the job being processed.

Storing and Handling Paper

Always use high-quality, xerographic-grade paper in the machine. Damaged, curled, or
damp paper can cause jams and image quality problems. Follow these simple rules to
store paper.

«
...
180
181
182
183
184
...
»

Summary of Contents for C123 Copycentre









































































































































































































































































































































































Reviews:

No comments

Related manuals for C123 Copycentre

ImageCLASS MF4570dw

Brand: Canon Pages: 164

imagePRESS C800 Series

Brand: Canon Pages: 132

ImageCLASS MF5730

Brand: Canon Pages: 2

SCX-4300 - SCX 4300 B/W Laser

Brand: Samsung Pages: 97

SCX 4828FN - Laser Multi-Function Printer

Brand: Samsung Pages: 151

SCX 4725FN - B/W Laser - All-in-One

Brand: Samsung Pages: 120

SCX 4500 - B/W Laser - All-in-One

Brand: Samsung Pages: 97

SCX 4200 - B/W Laser - All-in-One

Brand: Samsung Pages: 95

SCX 4500 - B/W Laser - All-in-One

Brand: Samsung Pages: 172

ProXpress M337x

Brand: Samsung Pages: 56

PROXPRESS M332 SERIES

Brand: Samsung Pages: 50

ML-2240 - 23 Ppm Mono Laser Printer

Brand: Samsung Pages: 82

Brand: Samsung Pages: 8

ML-1610 - B/W Laser Printer

Brand: Samsung Pages: 134

ML-1610 - B/W Laser Printer

Brand: Samsung Pages: 112

Brand: Samsung Pages: 128

Brand: Samsung Pages: 152

ML 3471ND - B/W Laser Printer

Brand: Samsung Pages: 207

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands