Xerox C123 Copycentre User Manual Download Page 159

Page: 159 / 360

Properties

Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 User Guide

159

Properties Features

The following table lists the items that can be set.

Some items may not be displayed depending on your machine configuration.

Feature

Setting items

Machine Details

Product Name

Displays the name of the product. This is a display-only item.

Serial No.

Displays the serial number of the machine. This is a display-
only item.

Name

Enter the name of the machine.

Location

Enter the location of the machine.

Contact Person

Enter the name of the System Administrator.

Administrator E-mail Address

Enter the e-mail address of the System Administrator.

Machine E-mail Address

Enter the e-mail address of the machine.

Comment

Enter a comment on the machine.

Configuration

Memory

Displays the size of the memory installed, amount of
memory used for each protocol, and the size of PostScript
memory if installed.

Available Printer Language

Lists the printer languages used by the machine and their
versions.

Software

Displays the version of software installed on the machine.

Hard Disk

Lists the names, and total and free sizes of the volumes in
the hard disk.

Hardware

Lists the hardware installed and their status.

Counters

Displays the total number of impressions and jobs.

Paper Tray Attributes

Trays

Lists the paper trays installed.

Paper Type

Lists the paper type set for each tray.

Priority

Allows you to set the priority for specified paper trays.

Summary of Contents for C123 Copycentre









































































































































































































































































































































































Search results

Summary of Contents for C123 Copycentre

Reviews:

Related manuals for C123 Copycentre

Brands by name

Popular brands

Xerox C123 Copycentre, User Manual

Search results

Summary of Contents for C123 Copycentre

Reviews:

Related manuals for C123 Copycentre

Brands by name

Popular brands