Xerox C123 Copycentre User Manual Download Page 273

Page: 273 / 360

Machine Status

Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 User Guide

273

Overwrite Hard Disk

Display the overwriting status of the hard disk.

NOTE:

This option is displayed if the feature is enabled in the System Settings.

Select [Overwrite Hard Disk] on
the [Machine Status] screen.

Print Mode

Allows you to change the default printer mode and emulation parameter settings.

For the lists of emulation parameters and their values, refer to

Emulation Parameters

in the Print chapter on page 142.

Select [Print Mode] on the
[Machine Status] screen.

Off-line

Sets the printer mode to off-line.

On-line

Sets the printer mode to on-line.

PCL Emulation

Displays the [PCL Emulation] screen.

[PCL Emulation] Screen

Use this feature to set parameter values for PCL emulation, which allows you to print
documents without using print driver software on your PC.

Select [PCL Emulation] on the
[Print Mode] screen.

Enter the parameter item
number in the [Item No.] field.

Select [Change Value] to
change the displayed value.
Select [Confirm] if no change is required.

Summary of Contents for C123 Copycentre









































































































































































































































































































































































Search results

Summary of Contents for C123 Copycentre

Reviews:

Related manuals for C123 Copycentre

Brands by name

Popular brands

Xerox C123 Copycentre, User Manual

Search results

Summary of Contents for C123 Copycentre

Reviews:

Related manuals for C123 Copycentre

Brands by name

Popular brands