Xerox C123 Copycentre User Manual Download Page 217

Page: 217 / 360

Print Mode Settings

Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 User Guide

217

Remote Server Port Number

Allows you to enter the port number for the KDC server communication within the range
of 1–65535.

Remote Server Realm Name

Allows you to enter the KDC realm name within a maximum of 64 characters.

Other Settings

This feature allows you to select the e-mail receiving protocol from either SMTP or
POP3.

Select [Other Settings] on the
[Network Settings] screen.

Perform the necessary
operations.

Select [Close].

E-mail Receive Protocol

Allows you to select the protocol for receiving e-mail.

Print Mode Settings

This screen allows you to change the default settings for the printer configuration. For
more information, refer to the following.

NOTE:

Key Operator access is required for this feature.

Allocate Memory – page 218
Other Settings – page 220

Select [Print Mode Settings] on
the [System Settings] screen.

Select the required option.

Select [Close].

Summary of Contents for C123 Copycentre









































































































































































































































































































































































Search results

Summary of Contents for C123 Copycentre

Reviews:

Related manuals for C123 Copycentre

Brands by name

Popular brands

Xerox C123 Copycentre, User Manual

Search results

Summary of Contents for C123 Copycentre

Reviews:

Related manuals for C123 Copycentre

Brands by name

Popular brands